Washer-dryer continuously takes in and drains water

What does Continuous fill and drain mean?

The appliance repeatedly fills with water and then drains it immediately without completing a wash cycle. This often indicates problems with the drainage system's installation.

• The drain hose is not fitted at a height between 65 and 100 cm from the floor.
• The free end of the drain hose is submerged under water.
• The wall drainage system is not fitted with a breather pipe.
• Dwelling is on an upper floor, possibly causing drainage problems.

Click steps to track your progress.

1. 1

   Check the drain hose position; it should be between 65 and 100 cm from the floor.

2. 2

   Ensure the free end of the drain hose is not submerged in water.

3. 3

   Verify if your wall drainage system has a breather pipe.

4. 4

   If the problem persists, turn off the water tap, switch the appliance off, and contact Technical Assistance.