E:30 / -80 — Drain problem or blocked pump

What does E:30 / -80 mean?

This error code indicates a problem with the drainage system, such as a blocked or kinked drain hose, a blocked drain pump, or an incorrectly installed pump cover. It can also occur if the water outlet hose is installed too high.

• Drain pipe or water outlet hose is blocked or trapped.
• Drain pump is blocked.
• Water outlet hose is connected too high (above 1 meter).
• Pump cover is not correctly assembled.
• Unapproved extension installed on the water drain hose.
• Excessive detergent dosage causing too much foam.

Click steps to track your progress.

1. 1

   Clean the drain pipe and the water outlet hose.

2. 2

   Ensure that the drain pipe and water outlet hose are not kinked or trapped.

3. 3

   Clean the drain pump as instructed in the manual.

4. 4

   Verify the pump cover is correctly assembled and fully screwed in with the handle vertical.

5. 5

   Remove any unapproved extensions from the water hose.

6. 6

   Reduce the amount of detergent for the next wash cycle if there was heavy foam.