Beam Error — IrDA test transmission failed

Was bedeutet Beam Error (IrDA Test) ?

During the Executive & IrDA Test Mode, this message indicates that the transmission of the test pattern failed in one or both directions. The beeper will also sound.

• IrDA port is obstructed or dirty
• Loopback device is not connected or faulty
• Faulty Executive or IrDA port
• Software or configuration issue

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Ensure the IrDA port and the loopback device are clean and unobstructed.

2. 2

   Verify the loopback device is properly connected.

3. 3

   Check the connections to both the Executive and IrDA ports.

4. 4

   Restart the test. If it continues to fail, consult service documentation.