Collision sensor defective or Mower jammed — Problem with sensing obstacles

Was bedeutet Collision sensor defective ?

The Automower is jammed, or one or both collision sensors are not working correctly, possibly due to loose parts, sensor malfunction, or cabling issues.

• The Automower has jammed on an object.
• Rear screws on the body are not tightened correctly.
• Magnet in the collision sensor pillar is loose, twisted or missing.
• Collision sensor card or cabling is defective.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Remove any object that has jammed the Automower.

2. 2

   Lift the body from the rear section and feel whether the rear screws are secured correctly; if not, tighten them.

3. 3

   Check the collision sensors via Tools - Test - Sensors (shortcut 5-2-5) to see whether the magnets are seated correctly or if the mower indicates a collision without actual contact.

4. 4

   Inspect the collision sensor cabling for damage or incorrect seating of the magnet.