CodeRegistry
Marken
  1. Startseite
  2. husqvarna
  3. Automower Technical Manual
  4. Improperly installed battery
About·Privacy·Terms

CodeRegistry — Ihre globale Bibliothek für technische Lösungen.

Zu Ihrer Sicherheit: Befolgen Sie immer die offiziellen Herstellerhandbücher. CodeRegistry ist unabhängig und steht in keiner Verbindung zu den genannten Marken.

Improperly installed battery

Improperly installed battery — Battery not correctly seated or causing interference

husqvarna · Automower Technical Manual

Was bedeutet Improperly installed battery ?

This fault indicates that the battery in the Automower might not be installed correctly, potentially causing operational issues or interference with sensors.

Häufige Ursachen

  • Battery is not placed correctly in its holder.
  • Battery is installed with the wrong orientation (e.g., 'THIS SIDE DOWN' text not facing downwards).
  • Incorrect battery installation causing interference on the rear sensor.

Reparaturschritte & Checkliste

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

  1. 1

    Check that the battery is installed correctly in its holder.

  2. 2

    Ensure the battery is placed with the text 'THIS SIDE DOWN' facing downwards.

  3. 3

    Verify the battery is securely connected and not loose.

  4. 4

    If the fault message persists after re-seating the battery, check for other related sensor defects.

  5. 5

    Contact service if issues continue after correcting battery installation.

Alle Codes in diesem Handbuch durchsuchen (37)
Verifizierte technische Daten. Zuletzt aktualisiert: April 2026

Verwandte Fehlercodes

Automower runs at an angle or in an arcAutomower runs at an angle or in an arc — Tilt sensor calibration or defectBlade motor defectBlade motor defect or Blade disc blocked — Blades cannot rotate freelyBoth the mowing and charging times are shorter than usualBoth the mowing and charging times are shorter than usual — High temperatures or low battery capacity
Quelle: Husqvarna Automower Technical Manual
Open Manual (Page 106)Mehr Codes in diesem Handbuch suchen