CodeRegistry
Marken
  1. Startseite
  2. Lennox
  3. Communicating Systems
  4. 351
About·Privacy·Terms

CodeRegistry — Ihre globale Bibliothek für technische Lösungen.

Zu Ihrer Sicherheit: Befolgen Sie immer die offiziellen Herstellerhandbücher. CodeRegistry ist unabhängig und steht in keiner Verbindung zu den genannten Marken.

351

Alert 351 — Electric Heat Stage 1 Problem

Lennox · Communicating Systems

Was bedeutet 351 ?

There is an issue with the first stage of the air handler's electric heat. This could mean the pilot relay contacts did not close or the relay coil in the electric heat section did not energize.

Häufige Ursachen

  • Possible heat section or stage 1 failure.
  • Pilot relay contacts did not close.
  • Relay coil in the electric heat section did not energize.

Reparaturschritte & Checkliste

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

  1. 1

    The air handler will operate on the heat pump's first stage for the remainder of the heat call.

  2. 2

    Check for issues with the electric heat section or stage 1.

  3. 3

    Verify that the pilot relay contacts are closing and the relay coil is energizing.

Alle Codes in diesem Handbuch durchsuchen (41)
Verifizierte technische Daten. Zuletzt aktualisiert: April 2026

Verwandte Fehlercodes

14Inverter Flash Code 14 (Red 1 flash, Green 4 flashes) — OD Inverter Compressor Slowdown21Inverter Flash Code 21 (Red 2 flashes, Green 1 flash) — OD Inverter DC Peak Fault262 red flashes, 6 green flashes — Compressor startup fail
Quelle: Lennox Communicating Systems
Open Manual (Page 47)Mehr Codes in diesem Handbuch suchen