CodeRegistry
Marken
  1. Startseite
  2. Schneider Electric
  3. EVlink Smart Wallbox Charging Stations Troubleshooting
  4. EVlink City — Long beep and green lights blink
About·Privacy·Terms

CodeRegistry — Ihre globale Bibliothek für technische Lösungen.

Zu Ihrer Sicherheit: Befolgen Sie immer die offiziellen Herstellerhandbücher. CodeRegistry ist unabhängig und steht in keiner Verbindung zu den genannten Marken.

EVlink City — Long beep and green lights blink

EVlink City — Long beep and green lights blink — Restarting after reset

Schneider Electric · EVlink Smart Wallbox Charging Stations Troubleshooting

Was bedeutet EVlink City — Long beep and green lights blink ?

The charging station is emitting a long beep and its green indicator lights are blinking. This occurs after a reset procedure and indicates the station is restarting.

Häufige Ursachen

  • Completion of a factory reset procedure.

Reparaturschritte & Checkliste

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

  1. 1

    Close the door.

  2. 2

    Wait for the charging station to restart, which takes about a minute.

  3. 3

    If at step 3 of the reset procedure all right-hand indicator lights were off, close the door and restart the procedure.

  4. 4

    If only the right-hand green indicator light blinked at step 4, perform the reset procedure on the left side, then the right.

Alle Codes in diesem Handbuch durchsuchen (31)
Verifizierte technische Daten. Zuletzt aktualisiert: April 2026

Verwandte Fehlercodes

1 blink1 blink — Surge arrestor fault10 blinks10 blinks — Configuration file error2 blinks2 blinks — Trap not locked fault
Quelle: EVlink Smart Wallbox Charging Stations Troubleshooting
Open Manual (Page 23)Mehr Codes in diesem Handbuch suchen