CodeRegistry
Marken
  1. Startseite
  2. SolarEdge
  3. Inverters
  4. 31, 33
About·Privacy·Terms

CodeRegistry — Ihre globale Bibliothek für technische Lösungen.

Zu Ihrer Sicherheit: Befolgen Sie immer die offiziellen Herstellerhandbücher. CodeRegistry ist unabhängig und steht in keiner Verbindung zu den genannten Marken.

31, 33

AC Voltage Too High (Line 1/2/3) — Grid voltage is above the limit

SolarEdge · Inverters

Was bedeutet 31, 33 ?

The AC voltage from the grid is higher than the country's allowed limit. This can damage the inverter and other connected appliances.

Häufige Ursachen

  • High grid voltage
  • Incorrect country setting in the inverter
  • AC wiring too thin for the distance
  • Grid operator issues

Reparaturschritte & Checkliste

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

  1. 1

    Verify that the inverter is set to the correct country.

  2. 2

    Turn off the inverter and check the AC grid voltage.

  3. 3

    If the inverter is far from the grid connection point, consider using a larger gauge AC wire.

  4. 4

    Consult your grid operator.

  5. 5

    If regulations allow, use the SolarEdge Configuration Tool to adjust settings.

Alle Codes in diesem Handbuch durchsuchen (51)
Verifizierte technische Daten. Zuletzt aktualisiert: April 2026

Verwandte Fehlercodes

10, 37, 38Ground Current - RCD — High ground currents detected102DC Voltage Too High — Input DC voltage exceeds maximum level103, 119UDC Min / DC Voltage Too Low — Input DC voltage below minimum level
Quelle: SolarEdge Inverters
Open Manual (Page 76)Mehr Codes in diesem Handbuch suchen