Landroid Vision stops in working area — Obstacle or dense grass

Was bedeutet Landroid Vision stops in the working area ?

The Landroid Vision may stop if it encounters an obstacle in its path or if the grass is too long or dense for the current cutting height setting.

• Obstacle in the working area
• Cutting height set too low for grass length or density

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Remove any obstacles from the Landroid Vision's working area.

2. 2

   Raise the cutting height setting on the Landroid Vision.

3. 3

   If grass is very dense, you may need to raise the cutting height and then gradually lower it over multiple mowing sessions.

4. 4

   Ensure the boundary wire is properly installed and not obstructed.