Error 6X - Inductor temperature sensor too hot (specific zone)

What does 61, 62, 64, 65 mean?

These errors indicate that the temperature sensor for a specific inductor coil (61: LF, 62: LR, 64: RR, or 65: RF) is detecting an excessively high temperature. This could be due to ventilation issues or a faulty sensor/inductor.

• Insufficient cooktop ventilation (obstructed airway or fan)
• Incomplete inductor white isolation material
• Incorrectly connected inductor temperature sensor
• Defective inductor (temperature sensor resistance incorrect)
• Defective associated Generator Circuit Board

Click steps to track your progress.

1. 1

   Verify the cooktop ventilation is correct by checking for obstructed airways and ensuring the fan operates properly.

2. 2

   Verify the inductor's white isolation material is complete and fully covers the inductor.

3. 3

   Verify the inductor temperature sensor is correctly connected to the Induction Housing Assembly.

4. 4

   Test the inductor temperature sensor resistance (blue wires) at room temperature; it should be approximately 1000 ohms. Replace the inductor if the value is incorrect.

5. 5

   If the sensor and connections are good, replace the associated Generator Circuit Board for the affected zone.