¿Qué provoca el error No soft water & display is blank de Kenmore?

Fuse blown. Circuit breaker tripped. Circuit switched off

¿Cómo se corrige el código de falla No soft water & display is blank de Kenmore?

1. Check your home's circuit breaker panel or fuse box. 2. Replace any blown fuse or reset any tripped circuit breaker. 3. Ensure the relevant circuit is switched on. 4. Reprogram the electronic control if necessary. 5. Use the 'RECHARGE NOW' feature after restoring power.

No soft water & display is blank

No soft water and blank display - Check circuit breaker or fuse

Kenmore · Elite Water Softener

¿Qué significa No soft water & display is blank ?

The display is blank and there is no soft water, potentially due to a tripped circuit breaker, blown fuse, or switched-off circuit.

Causas comunes

Fuse blown
Circuit breaker tripped
Circuit switched off

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

1
Check your home's circuit breaker panel or fuse box.
2
Replace any blown fuse or reset any tripped circuit breaker.
3
Ensure the relevant circuit is switched on.
4
Reprogram the electronic control if necessary.
5
Use the 'RECHARGE NOW' feature after restoring power.

Ver todos los códigos en este manual (22)

Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

Brine tank floodedBrine tank flooded - Clogged drain hose or nozzle/venturi Brine tubing not connectedBrine tubing not connected - Brine cannot reach valve Bypass valve(s) in 'bypass' positionBypass valve(s) in bypass position - Soft water supply interrupted

Fuente: Kenmore Elite Water Softener

Open Manual (Page 22)Buscar más códigos en este manual