¿Cómo se corrige el código de falla Solid red Charge Indicator light or Charge Indicator light is off de Segway?

1. Check that AC power is present. 2. Ensure the Power Cord is fully seated in the Charge Port. 3. Unplug the power cord, then remove and reseat the Battery Pack(s). 4. If the problem persists, contact an Authorized Segway Dealer or Distributor.

Solid red Charge Indicator light or Charge Indicator light is off

Red or off Charge Indicator light — Charging failure detected

Segway · PT i2, x2

¿Qué significa Solid red Charge Indicator light or Charge Indicator light is off ?

If a charging failure is detected, charging stops. A solid red light or no light at all indicates a problem with the charging process.

Causas comunes

Problem with charging system
AC power issue
Battery pack issue

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

1
Check that AC power is present.
2
Ensure the Power Cord is fully seated in the Charge Port.
3
Unplug the power cord, then remove and reseat the Battery Pack(s).
4
If the problem persists, contact an Authorized Segway Dealer or Distributor.

Ver todos los códigos en este manual (13)

Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

Balance Mode Error iconBalance Mode Error icon on InfoKey — Unable to enter Balance Mode Flashing or solid green Charge Indicator lightFlashing or solid green Charge Indicator light — Charging normally InfoKey Controller Low Battery iconInfoKey Controller Low Battery icon — Replace InfoKey battery

Fuente: Segway PT i2, x2

Open Manual (Page 52)Buscar más códigos en este manual