¿Qué provoca el error 6 red blinks de Tesla Wall Connector?

Input voltage is not within the expected 200-240 volt range.. Issues with the local electrical grid quality.. Faulty power supply.

¿Cómo se corrige el código de falla 6 red blinks de Tesla Wall Connector?

1. Verify that the power supply voltage is nominal (200-240 volts). 2. Have an electrician measure the voltage at the Wall Connector's terminal block (L1 to L2/N, L1 to Ground, L2/N to Ground). 3. Record these voltage readings for diagnostic purposes. 4. Contact your utility provider if grid quality issues are suspected.

6 red blinks

Six red blinks — Overvoltage or poor grid quality detected, charging disabled

Tesla Wall Connector · (Gen 3)

¿Qué significa 6 red blinks ?

The Wall Connector has detected voltage levels outside the normal operating range or poor quality power from the grid. Charging is disabled for safety.

Causas comunes

Input voltage is not within the expected 200-240 volt range.
Issues with the local electrical grid quality.
Faulty power supply.

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

1
Verify that the power supply voltage is nominal (200-240 volts).
2
Have an electrician measure the voltage at the Wall Connector's terminal block (L1 to L2/N, L1 to Ground, L2/N to Ground).
3
Record these voltage readings for diagnostic purposes.
4
Contact your utility provider if grid quality issues are suspected.

Ver todos los códigos en este manual (49)

Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

1 red blinkOne red blink — Ground fault detected, charging disabled 2 red blinksTwo red blinks — Ground assurance fault, high ground resistance detected 3 red blinksThree red blinks — High temperature detected, charging limited or disabled

Fuente: Tesla Wall Connector (Gen 3)

Open Manual (Page 55)Buscar más códigos en este manual