¿Qué provoca el error Green pulsing de Tesla Wall Connector?

Initial setup after installation.. Wall Connector needs to be connected to Wi-Fi.. Network settings require configuration.

¿Cómo se corrige el código de falla Green pulsing de Tesla Wall Connector?

1. Open the Tesla app on your mobile device. 2. Follow the on-screen instructions to commission the Wall Connector. 3. Ensure your mobile device is connected to the Wall Connector's temporary Wi-Fi network during setup.

Green pulsing

Pulsing green LED — Ready to commission or SSID broadcasting

Tesla Wall Connector · (Gen 3)

¿Qué significa Green pulsing ?

A pulsing green LED indicates that the Wall Connector is broadcasting its network (SSID) and is ready to be commissioned or set up.

Causas comunes

Initial setup after installation.
Wall Connector needs to be connected to Wi-Fi.
Network settings require configuration.

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

1
Open the Tesla app on your mobile device.
2
Follow the on-screen instructions to commission the Wall Connector.
3
Ensure your mobile device is connected to the Wall Connector's temporary Wi-Fi network during setup.

Ver todos los códigos en este manual (49)

Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

1 red blinkOne red blink — Ground fault detected, charging disabled 2 red blinksTwo red blinks — Ground assurance fault, high ground resistance detected 3 red blinksThree red blinks — High temperature detected, charging limited or disabled

Fuente: Tesla Wall Connector (Gen 3)

Open Manual (Page 54)Buscar más códigos en este manual