¿Qué provoca el error Red LED 3 flashes de Tesla Wall Connector?

Rotary switch set to an invalid position. Incorrect configuration during installation

¿Cómo se corrige el código de falla Red LED 3 flashes de Tesla Wall Connector?

1. Consult your electrician to verify the rotary switch setting. 2. Ensure the rotary switch is set to a valid operating current or mode (e.g., '0' for Test Mode, 'F' for Slave Mode, or a number for current).

Red LED 3 flashes

Red LED 3 flashes — Incorrect rotary switch setting

Tesla Wall Connector · (Gen 3)

¿Qué significa Red LED 3 flashes ?

The rotary switch inside the Wall Connector has been set incorrectly. This switch is used for configuration settings.

Causas comunes

Rotary switch set to an invalid position
Incorrect configuration during installation

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

1
Consult your electrician to verify the rotary switch setting.
2
Ensure the rotary switch is set to a valid operating current or mode (e.g., '0' for Test Mode, 'F' for Slave Mode, or a number for current).

Ver todos los códigos en este manual (49)

Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

1 red blinkOne red blink — Ground fault detected, charging disabled 2 red blinksTwo red blinks — Ground assurance fault, high ground resistance detected 3 red blinksThree red blinks — High temperature detected, charging limited or disabled

Fuente: Tesla Wall Connector (Gen 3)

Open Manual (Page 25)Buscar más códigos en este manual