¿Qué provoca el error Solid yellow de Tesla Wall Connector?

Wall Connector has not been commissioned yet

¿Cómo se corrige el código de falla Solid yellow de Tesla Wall Connector?

1. Follow the commissioning procedure outlined in the manual. 2. Turn on the circuit breaker to energize the unit. 3. Connect to the Wall Connector's Wi-Fi network using a smartphone or other Wi-Fi enabled device. 4. Access the web browser commissioning interface via QR code or by typing the URL.

Solid yellow

Solid yellow LED — Wall Connector is ready to be commissioned

Tesla Wall Connector · (Gen 3)

¿Qué significa Solid yellow ?

A solid yellow light on the Wall Connector means it is powered on and ready for the initial setup and configuration process.

Causas comunes

Wall Connector has not been commissioned yet

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

1
Follow the commissioning procedure outlined in the manual.
2
Turn on the circuit breaker to energize the unit.
3
Connect to the Wall Connector's Wi-Fi network using a smartphone or other Wi-Fi enabled device.
4
Access the web browser commissioning interface via QR code or by typing the URL.

Ver todos los códigos en este manual (49)

Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

1 red blinkOne red blink — Ground fault detected, charging disabled 2 red blinksTwo red blinks — Ground assurance fault, high ground resistance detected 3 red blinksThree red blinks — High temperature detected, charging limited or disabled

Fuente: Tesla Wall Connector (Gen 3)

Open Manual (Page 33)Buscar más códigos en este manual