¿Qué provoca el error LED Off de Wallbox?

No power supply to the charger. Tripped circuit breaker. Internal power fault

¿Cómo se corrige el código de falla LED Off de Wallbox?

1. Check if the circuit breaker for the charger is on. 2. Verify the charger is properly connected to the power source. 3. Ensure the main power switch is in the 'ON' position. 4. Check for any visible damage to the power cable or connection. 5. Contact an electrician to confirm power supply to the installation point.

LED Off

LED Off - Charger is not receiving power

Wallbox · Pulsar Plus Chargers

¿Qué significa LED Off ?

The status LED on the Wallbox Pulsar Plus is completely off. This indicates the charger is not powered on or receiving electricity.

Causas comunes

No power supply to the charger
Tripped circuit breaker
Internal power fault

Pasos de reparación & Lista de verificación

Haga clic en los pasos para seguir su progreso.

1
Check if the circuit breaker for the charger is on.
2
Verify the charger is properly connected to the power source.
3
Ensure the main power switch is in the 'ON' position.
4
Check for any visible damage to the power cable or connection.
5
Contact an electrician to confirm power supply to the installation point.

Ver todos los códigos en este manual (20)

Datos técnicos verificados. Última actualización: April 2026

Fallas relacionadas

Blinking LEDBlinking LED - Communication Issue or Standby Blue LEDBlue LED - Wi-Fi connection established Charger appears on nearby devices - NoCharger not found via Bluetooth - Connection issue

Fuente: Wallbox Pulsar Plus Chargers

Open Manual (Page 1)Buscar más códigos en este manual