Evaporator Coil Temperature 1 Sensor Fail alarm

¿Qué significa Evaporator Coil Temperature 1 Sensor Fail ?

This alarm signifies that the Evaporator Coil 1 (EC1) sensor has failed, either due to an open circuit or by providing readings outside its expected range. This sensor protects the compressor from freezing.

• EC1 sensor has an open circuit
• EC1 sensor readings are outside the input range
• Damaged wiring harness to the EC1 sensor
• Faulty EC1 sensor
• Faulty SEC board

Haga clic en los pasos para seguir su progreso.

1. 1

   Check the EC1 sensor reading via the Map Gateway tool ('Details' > 'Service' > 'Inputs' > 'CoilSensors').

2. 2

   Unplug the EC1 sensor wires from the SEC board and measure the resistance of the wires to the sensor. Compare this to a resistance chart for the expected temperature.

3. 3

   If the resistance reading is incorrect, trace the wires from the plug to the sensor and perform the resistance check again.

4. 4

   If the wiring harness is damaged, replace or repair it. If the harness is fine, replace the sensor. If both are functional, replace the SEC board.