CodeRegistry
Brands
  1. Home
  2. Fujitsu
  3. 410A Multi-Zone Mini-Split Systems
  4. Operation 5 Times / Timer 8 Times / 58
About·Privacy·Terms

CodeRegistry — Your global library for technical solutions.

For your safety: always follow the equipment manufacturer’s official manuals. CodeRegistry is an independent help site and is not affiliated with the brands listed here.

Operation 5 Times / Timer 8 Times / 58

Operation LED blinks 5 times, Timer LED blinks 8 times, and wired remote shows 58 — Intake grille error.

Fujitsu · 410A Multi-Zone Mini-Split Systems

What does Operation 5 Times / Timer 8 Times / 58 mean?

The micro switch for the intake grille is detected as open while the compressor is running, meaning the grille may not be properly closed.

Common Causes

  • The limit switch for the intake grille is faulty or disconnected.
  • Loose or damaged connector (CN11) or wire.
  • The controller PCB is defective.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Power off the indoor unit and check that the intake grille is securely closed and not obstructed.

  2. 2

    Inspect the area around the grille for any visible issues with the limit switch or its connections.

  3. 3

    Reset power to the unit. If the error persists, professional service is needed to check the limit switch or controller PCB.

Browse all codes in this manual (60)
Verified technical data. Last updated: April 2026

Related Faults

6 Times, 4 Times Continuous (64)6 Times, 4 Times Continuous (64) — Active Filter / PFC Circuit error6 Times, 5 Times Continuous (65)6 Times, 5 Times Continuous (65) — IPM error / Trip terminal L error7 Times, 1 Time Continuous (71)7 Times, 1 Time Continuous (71) — Discharge thermistor error
Source: Fujitsu 410A Multi-Zone Mini-Split Systems
Open Manual (Page 9)Search more codes in this manual