CodeRegistry
Brands
  1. Home
  2. husqvarna
  3. Automower 310/315/315x
  4. Short mowing/charging times
About·Privacy·Terms

CodeRegistry — Your global library for technical solutions.

For your safety: always follow the equipment manufacturer’s official manuals. CodeRegistry is an independent help site and is not affiliated with the brands listed here.

Short mowing/charging times

Short mowing and charging times — Reduced battery performance or operational setting issues

husqvarna · Automower 310/315/315x

What does Short mowing/charging times mean?

The robot mower's operational and charging durations are noticeably shorter than their usual lengths. This can indicate battery wear, incorrect settings, or environmental factors affecting the battery.

Common Causes

  • Worn-out or spent battery
  • Mower is in a standby period
  • START button not pushed after closing the hatch
  • Parking mode is activated
  • Battery temperature is too high or too low

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Check the mower's battery health. If it's old or showing signs of degradation, consider replacing the battery (refer to page 41).

  2. 2

    If the mower is parked for extended periods, check its schedule and standby settings (page 37) to ensure it's not intentionally idle.

  3. 3

    After placing the mower in the charging station and closing the hatch, ensure you press the START button and confirm with your PIN code.

  4. 4

    Verify the mower's operating mode (page 36). If it's in parking mode, change it to a suitable mowing mode.

  5. 5

    Ensure the charging station is located in a shaded area, protected from direct sunlight or extreme temperatures, which can affect battery performance.

Browse all codes in this manual (17)
Verified technical data. Last updated: April 2026

Related Faults

Blue flashing lightBlue flashing light — Boundary loop disconnected or brokenConnection NOT changedConnection NOT changed — Failed to update loop signalCutting system blockedCutting system blocked — Blade disc obstructed or waterlogged
Source: Husqvarna Automower 310/315/315x
Open Manual (Page 51)Search more codes in this manual