CodeRegistry
Brands
  1. Home
  2. MHI
  3. Air Conditioning
  4. TIMER light 7-time flash
About·Privacy·Terms

CodeRegistry — Your global library for technical solutions.

For your safety: always follow the equipment manufacturer’s official manuals. CodeRegistry is an independent help site and is not affiliated with the brands listed here.

TIMER light 7-time flash

TIMER light 7-time flash — Cooling high pressure protection

MHI · Air Conditioning

What does TIMER light 7-time flash mean?

The TIMER light flashes seven times, indicating that the cooling high pressure protection has been activated. This usually means there's excessively high pressure in the refrigeration system during cooling mode.

Common Causes

  • Overcharge of refrigeration
  • Short circuit of outdoor unit
  • Defective outdoor unit boards

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Turn off the air conditioner and allow the unit to cool down for at least 30 minutes.

  2. 2

    Ensure the outdoor unit's coils are clean and free of obstructions, which can impede heat rejection.

  3. 3

    Check if the outdoor fan is running correctly to help dissipate heat.

  4. 4

    If the issue persists, switch off the power and contact a qualified technician, as it may involve refrigerant levels or component issues.

  5. 5

    Verify that no external factors are causing the outdoor unit to overheat, such as direct sunlight or nearby heat sources.

Browse all codes in this manual (124)
Verified technical data. Last updated: April 2026

Related Faults

00Outdoor Board LED only green lights up after startup - No outdoor unit of address 0 / Remote controller transmission wire open1OPERATION INDICATOR lamp blinks 1 time (Pattern A) - Indoor/outdoor unit communication error (Transmitting error - Outdoor unit)14OPERATION INDICATOR lamp blinks 14 times (Pattern A) - Other errors
Source: MHI Air Conditioning
View Official PDFSearch more codes in this manual