Wi-Fi LED blinks 5 times — Wi-Fi connection failed

What does Wi-Fi LED 5 blinks mean?

The Wi-Fi interface LED blinks 5 times, indicating that the connection to the router failed. This can happen in either WPS-PUSH or Access Point mode due to various reasons like communication distance, router settings, or incorrect setup steps.

• Communication distance too far between Wi-Fi interface and router
• Router settings (encryption, authentication, connection limits) are preventing connection
• WPS button on router not pressed within 2 minutes (WPS-PUSH mode)
• Incorrect Wi-Fi settings or KEY entered on smartphone (Access Point mode)
• Connection not completed within 10 minutes (Access Point mode)

Click steps to track your progress.

1. 1

   Reset the Wi-Fi connection by holding the Temperature button for 5 seconds, then selecting the appropriate mode ("_ 2" for WPS-PUSH or "¯ 1" for Access Point) and pressing the remote button.

2. 2

   For WPS-PUSH mode: Press the WPS button on your router within 2 minutes of selecting the mode on the air conditioner.

3. 3

   For Access Point mode: Check smartphone Wi-Fi settings, re-enter the correct SSID and KEY if necessary, and ensure setup is completed within 10 minutes.

4. 4

   Ensure the router is within close proximity to the Wi-Fi interface and review your router's settings (encryption, authentication, connection limits).