Electronic Crossover® ignition system fails to ignite — No spark or click from igniter

What does Electronic igniter fails mean?

If the electronic ignition system does not produce a spark or clicking sound when the button is pressed, or fails to light the burners, the problem is likely with the ignition system components.

• Dead or weak AA battery
• Plastic wrap not removed from a new battery
• Igniter wires improperly attached to the igniter module
• Igniter wires not connected to the igniter button terminals
• Ceramic igniter assembly not fully inserted into burner tube igniter channel
• Faulty igniter button

Click steps to track your progress.

1. 1

   Attempt to light the grill with a match to verify that gas flow is not the issue.

2. 2

   Verify that the AA battery is in good condition and its plastic wrapping has been removed.

3. 3

   Ensure igniter wires are properly attached to the igniter module.

4. 4

   Check that igniter wires are connected to the terminals on the igniter button under the control panel.

5. 5

   Confirm the ceramic igniter assembly is fully inserted into the burner tube igniter channel.

6. 6

   Listen for igniter clicking and look for sparks at the burner when pressing the button.