AF (restricted air flow) - Lint screen or vent issue

What does AF mean?

The 'AF' diagnostic code signifies restricted airflow, which can be caused by a clogged lint screen, a blocked or damaged vent system, or a vent that is improperly installed. The dryer will continue to run, but efficiency will be reduced.

• Clogged lint screen.
• Crushed or kinked vent run from dryer to wall.
• Lint and debris in the vent run from dryer to wall.
• Clogged exterior vent exhaust hood.
• Vent system exceeds recommended length or number of elbows.

Click steps to track your progress.

1. 1

   Touch any key to clear the code from the display.

2. 2

   Clean the lint screen before or after every load.

3. 3

   Check the vent run from the dryer to the wall for crushing or kinking.

4. 4

   Confirm the vent run and exterior exhaust hood are free of lint and debris.

5. 5

   Verify your vent system adheres to recommended run length and elbow count (refer to Installation Instructions).

6. 6

   Select a Timed Dry heated cycle and restart the dryer.