Lo FL, F8 E1, or F08 E01 on display - Water supply error

What does Lo FL / F8 E1 / F08 E01 mean?

This error indicates a problem with the washer's water supply. The unit will drain for 8 minutes while the door is locked; this drain cycle must complete before the error code can be reset.

• One or both water supply hoses are not attached or not supplying water to the inlet valve.
• Hot and/or cold water faucets are turned off.
• Inlet valve screens on the washer may be clogged.
• Inlet hoses have kinks or are pinched.
• Auto shut-off connectors and hoses (if used) are not properly installed or are not working correctly.
• Inlet hoses are not manufacturer's recommended type.

Click steps to track your progress.

1. 1

   Allow the washer's 8-minute drain cycle to complete with the door locked.

2. 2

   Ensure both the hot and cold water faucets for the washer are fully turned on.

3. 3

   Check that both hot and cold inlet hoses are securely attached to the washer and the faucets, and are free of kinks.

4. 4

   Inspect the inlet valve screens on the back of the washer for clogs and clean them if necessary.

5. 5

   Touch POWER once to clear the code after the drain cycle finishes, then touch POWER again to restart the washer.