CodeRegistry
Brands
  1. Home
  2. Worx
  3. Landroid Robotic Mowers
  4. The green light on the charging station turns on before charging is complete.
About·Privacy·Terms

CodeRegistry — Your global library for technical solutions.

For your safety: always follow the equipment manufacturer’s official manuals. CodeRegistry is an independent help site and is not affiliated with the brands listed here.

The green light on the charging station turns on before charging is complete.

The green light on the charging station turns on before charging is complete. — Charging station overheating or overcooling

Worx · Landroid Robotic Mowers

What does The green light on the charging station turns on before charging is complete. mean?

The charging station's green light indicates a ready state, but it turns on prematurely while the battery is still charging. This might be due to the charging station's temperature being outside the optimal range.

Common Causes

  • Charging station is operating in excessive heat or cold.
  • Temperature sensors within the charging station are affected by extreme conditions.
  • Internal charging process is interrupted by temperature fluctuations.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Move the charging station to a location with a moderate ambient temperature.

  2. 2

    Ensure the charging station is not exposed to direct sunlight or freezing conditions.

  3. 3

    Wait until the charging station reaches a normal operating temperature.

  4. 4

    Check for any obstructions around the charging station that might hinder ventilation.

Browse all codes in this manual (53)
Verified technical data. Last updated: April 2026

Related Faults

Battery temperature out of range! Please wait.Battery temperature out of range! Please wait. — Battery is too hot or too cold for chargingBattery voltage too low! Please change battery.Display shows 'Battery voltage too low! Please change battery.' — Battery is exhausted or faultyBlade disc does not spinBlade disc not spinning — Landroid is searching for charging base
Source: Worx Landroid Robotic Mowers
Open Manual (Page 34)Search more codes in this manual