Landroid Vision stops in working area — Obstacle or dense grass

What does Landroid Vision stops in the working area mean?

The Landroid Vision may stop if it encounters an obstacle in its path or if the grass is too long or dense for the current cutting height setting.

• Obstacle in the working area
• Cutting height set too low for grass length or density

Click steps to track your progress.

1. 1

   Remove any obstacles from the Landroid Vision's working area.

2. 2

   Raise the cutting height setting on the Landroid Vision.

3. 3

   If grass is very dense, you may need to raise the cutting height and then gradually lower it over multiple mowing sessions.

4. 4

   Ensure the boundary wire is properly installed and not obstructed.