SF 15 - Airflow Sensor Error Correction/Pressure Sensor Communication storage failure

What does SF 15 mean?

A Storage Failure (SF) error, specifically SF 15, indicates that the slave thermostat's stored Airflow Sensor Error Correction or Pressure Sensor Communication (for SSP-01E) setting has been corrupted or lost. The system will default to a Mid-Range Value. These settings are crucial for accurate airflow and pressure monitoring.

• Corruption of stored sensor error correction or communication data in the slave thermostat's memory.
• Power fluctuations or system reset causing data loss.
• Internal hardware fault affecting non-volatile memory.

Click steps to track your progress.

1. 1

   Establish communications with the slave thermostat using the PC Command Center software.

2. 2

   Initiate a Device Inquiry for the slave thermostat to verify its current settings.

3. 3

   Perform the 'Modify Device Information' command and navigate to the Airflow Sensor Error Correction or Pressure Sensor Communication setting.

4. 4

   Re-enter or reset the appropriate values for these settings.

5. 5

   Press F1 to 'Perform Update' and wait for acknowledgement to save the new settings.

6. 6

   Exit the configuration menu and program, then verify the settings are correctly stored.