CodeRegistry
Brands
  1. Home
  2. Fujitsu
  3. Air Conditioners
  4. Drain Problem (AUY, ABY & AWY)
About·Privacy·Terms

CodeRegistry — Your global library for technical solutions.

For your safety: always follow the equipment manufacturer’s official manuals. CodeRegistry is an independent help site and is not affiliated with the brands listed here.

Drain Problem (AUY, ABY & AWY)

Red 4 Pulses, Green Blinks, Yellow Off (AUY, ABY & AWY) — Drain Problem

Fujitsu · Air Conditioners

What does Drain Problem (AUY, ABY & AWY) mean?

The red LED shows 4 pulses, the green LED blinks, and the yellow LED is off. This indicates a problem with the unit's condensate drainage, likely due to a high water level.

Common Causes

  • Clogged or blocked condensate drain line.
  • Full drain pan due to inadequate drainage.
  • Faulty condensate pump (if installed).

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Turn off the air conditioner to prevent water overflow.

  2. 2

    Check the condensate drain pan for excess water and carefully remove it if full.

  3. 3

    Inspect and clear any blockages from the condensate drain line (often a small pipe exiting the indoor unit).

  4. 4

    Ensure the unit is level to facilitate proper drainage.

  5. 5

    If the problem continues, contact a technician to inspect the drain system or pump.

Browse all codes in this manual (60)
Verified technical data. Last updated: April 2026

Related Faults

AFM Filter Error (AUY, ABY & AWY)Red Blinks, Green 12 Pulses, Yellow Off (AUY, ABY & AWY) — Active Filter Module ErrorAir Sensor Closed (AUY, ABY & AWY)Red 2 Pulses, Green Blinks, Yellow Blinks (AUY, ABY & AWY) — Air Sensor Closed Circuit (Short)Air Sensor Open (AUY, ABY & AWY)Red 2 Pulses, Green Blinks, Yellow Off (AUY, ABY & AWY) — Air Sensor Open Circuit
Source: Fujitsu Air Conditioners
Open Manual (Page 1)Search more codes in this manual