CodeRegistry
Brands
  1. Home
  2. Fujitsu
  3. Air Conditioners
  4. Red 4 Flashes, Green 7 Flashes
About·Privacy·Terms

CodeRegistry — Your global library for technical solutions.

For your safety: always follow the equipment manufacturer’s official manuals. CodeRegistry is an independent help site and is not affiliated with the brands listed here.

Red 4 Flashes, Green 7 Flashes

Red 4 Flashes, Green 7 Flashes (Single System) — VDD Permanent Stop Protection

Fujitsu · Air Conditioners

What does Red 4 Flashes, Green 7 Flashes mean?

The red LED flashes four times and the green LED flashes seven times on the indoor unit. This indicates that the VDD (Voltage Dependent Detector) protection has permanently stopped the unit, likely due to a severe voltage irregularity.

Common Causes

  • Severe overvoltage or undervoltage condition.
  • Fault in the power supply circuit to the unit.
  • Malfunction within the unit's power protection circuitry.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Turn off the air conditioner's power at the main circuit breaker immediately.

  2. 2

    Wait for at least 5 minutes to allow for a full system reset.

  3. 3

    Before restoring power, check for any reported power issues in your area.

  4. 4

    If the error reoccurs, contact an electrician to check your home's voltage supply and an HVAC technician for unit inspection.

Browse all codes in this manual (60)
Verified technical data. Last updated: April 2026

Related Faults

AFM Filter Error (AUY, ABY & AWY)Red Blinks, Green 12 Pulses, Yellow Off (AUY, ABY & AWY) — Active Filter Module ErrorAir Sensor Closed (AUY, ABY & AWY)Red 2 Pulses, Green Blinks, Yellow Blinks (AUY, ABY & AWY) — Air Sensor Closed Circuit (Short)Air Sensor Open (AUY, ABY & AWY)Red 2 Pulses, Green Blinks, Yellow Off (AUY, ABY & AWY) — Air Sensor Open Circuit
Source: Fujitsu Air Conditioners
Open Manual (Page 1)Search more codes in this manual