Warning 93 — External sensor signal out of range

What does 93 mean?

The pump is receiving a signal from an external sensor that is outside the normal operating range. This could also mean the sensor has been removed but the analog input is still active.

• Mismatch between the external sensor's output signal (0-10V or 4-20mA) and the pump's analog input setting.
• Damaged external sensor cable.
• Incorrect cable connection at either the pump or the sensor.
• External sensor has been removed, but the analog input has not been disabled in the pump's settings.

Click steps to track your progress.

1. 1

   Verify that the electrical signal setting (0-10 V or 4-20 mA) in the pump's menu matches the external sensor's output signal. Adjust the analog input setting via the 'Assist' menu if needed (Page 34).

2. 2

   Check the external sensor cable for any signs of damage or wear.

3. 3

   Inspect the cable connections at both the pump and the external sensor to ensure they are correct and secure.

4. 4

   If the sensor has been removed, disable the analog input via the pump's 'Assist' menu, or replace the sensor with a working one.