husqvarna Automower 115H
13 fault codes documented
Blue flashing light — Boundary loop issue
The indicator lamp on the charging station flashes blue, indicating a problem with the boundary loop. This could mean the wire is disconnected or has a break.
Cutting system blocked — Blade disc is obstructed or in water
The mower's display shows a message indicating the cutting system is blocked. This can be due to debris wrapped around the blade disc or the mower sitting in a pool of water.
Green flashing light — ECO mode active with good signals
The indicator lamp on the charging station flashes green. This means the boundary loop and guide wire signals are good, and the ECO mode is currently activated. No action is required.
Outside working area — Mower detects it's outside boundaries
The robot mower's display shows 'Outside working area', indicating it cannot detect the boundary wire signal or is positioned outside its defined work area. This can be caused by installation errors or external interference.
Product stopped by STOP button — Mower paused or disarmed
The robot mower has stopped due to the STOP button being activated. To resume operation, the PIN code must be entered and the start button pressed.
Red flashing light — Charging station antenna interruption
The indicator lamp on the charging station flashes red, suggesting an interruption with the charging station's internal antenna. This is an internal fault that usually requires professional assistance.
Shorter mowing and charging times than usual — Battery or schedule issue
The robot mower's battery life for mowing or its charging duration is noticeably shorter than expected. This could point to a worn-out battery or the product being in a standby period.
Solid green light — Good signals
The indicator lamp on the charging station is continuously green, indicating that the boundary loop and guide wire signals are working correctly. No action is needed.
Solid red light — Charging station circuit board fault or power supply issue
The indicator lamp on the charging station is continuously red, indicating a serious fault with the charging station's circuit board or an incorrect power supply. This usually requires professional attention.
Trapped — Mower is stuck
The robot mower is unable to move because it has become caught or stuck behind an obstacle in the work area. The display shows a 'Trapped' message.
Uneven mowing results — Inconsistent lawn appearance
The lawn does not have an even cut, appearing patchy or with varying grass heights after the robot mower has operated. This can be due to schedule, area coverage, or blade issues.
Wheel motor blocked, left/right — Drive wheel is obstructed
The robot mower's display shows a message indicating that one of its drive wheels is blocked. This usually means something is physically preventing the wheel from turning, such as grass or debris.
Yellow flashing light — Guide wire issue
The indicator lamp on the charging station flashes yellow, indicating a problem with the guide wire. This could mean the guide wire is disconnected or has a break.