Blue flashing light — Boundary loop issue

What does Blue flashing light mean?

The indicator lamp on the charging station flashes blue, indicating a problem with the boundary loop. This could mean the wire is disconnected or has a break.

• Boundary wire not properly connected to the charging station
• Break in the boundary loop wire

Click steps to track your progress.

1. 1

   Check that all boundary wire connectors (L and R) are securely and properly fitted to the charging station.

2. 2

   Ensure ECO mode is turned off if you are using the wire break detection method (refer to page 25).

3. 3

   To locate the break, switch the connections between the L boundary wire and the GUIDE wire at the charging station. If the indicator lamp turns solid green, the break is in the boundary wire segment between the original L terminal and where the guide wire connects to the boundary wire.

4. 4

   If the lamp is still flashing blue, switch the connections between the R boundary wire and the GUIDE wire at the charging station. If it turns solid green, the break is in the boundary wire segment between the original R terminal and where the guide wire connects to the boundary wire.

5. 5

   Follow the detailed method on page 43 to narrow down the exact location of the break.

6. 6

   Once found, replace the damaged section of the loop with a new wire and splice using original couplers.