CodeRegistry
Brands
  1. Home
  2. Miele
  3. Tumble Dryers
  4.  indicator light + signal
About·Privacy·Terms

CodeRegistry — Your global library for technical solutions.

For your safety: always follow the equipment manufacturer’s official manuals. CodeRegistry is an independent help site and is not affiliated with the brands listed here.

 indicator light + signal

 indicator light and signal — Condensed water container full or drain hose kinked

Miele · Tumble Dryers

What does  indicator light + signal mean?

The dryer's  indicator light comes on after a programme is cancelled, accompanied by an audible signal. This indicates that the condensed water container is full or there is a problem with the drain hose.

Common Causes

  • Condensed water container is full.
  • Drain hose is kinked or blocked.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Open and close the dryer door (with the tumble dryer switched on) to switch off the  indicator light.

  2. 2

    Empty the condensed water container.

  3. 3

    Check the drain hose for any kinks or blockages.

  4. 4

    Refer to the 'Cleaning and care' section of the manual for proper maintenance.

Browse all codes in this manual (99)
Verified technical data. Last updated: April 2026

Related Faults

### flashing### flashing in time display – PIN code entry required000000 — PIN code access activatedAdjust the load'Adjust the load' lights up after programme cancelled — Drum empty or laundry too dry
Source: Miele Tumble Dryers
Open Manual (Page 48)Search more codes in this manual