Start/Stop Sensor Flashing (after 10 mins) — Energy saving mode activated

What does Start/Stop sensor flashing mean?

Approximately 10 minutes after a programme ends, the Start/Stop sensor begins to flash and the display goes out. This is a normal energy-saving function, not an error. The drum may also turn at intervals during the anti-crease phase.

• The dryer has entered an energy-saving mode after the program concluded.

Click steps to track your progress.

1. 1

   Touch any sensor on the control panel to reactivate the display and indicators.

2. 2

   If you want to change this behavior, go to the 'Programmable functions' chapter.

3. 3

   Adjust the ' Control panel switch-off status' setting to prevent the display from going out so quickly.