E466 — DC LINK over-current / low-voltage error

What does E466 mean?

This error indicates a problem with the DC Link, which manages the power supply to the air conditioning unit. It means there's either too much current or too low voltage detected.

• Fault in the main input power supply (incorrect voltage or stability issue).
• Loose or incorrect power connections, possibly with communication wires interchanged.
• Problems with the reactor or its connecting wires.
• Defective fuse on the EMI Printed Board Assembly (PBA).

Click steps to track your progress.

1. 1

   Check the main power connection to your air conditioning unit. Verify the input voltage meets requirements (e.g., 220Vac for single-phase, 380Vac for 3-phase).

2. 2

   Power off the unit at the main breaker, wait for a few minutes, then power it back on to see if the error clears.

3. 3

   Inspect all power wires and connections for tightness and correct joining. If multiple units are installed, ensure communication wires are not mixed with power connections.

4. 4

   Visually check the reactor and its connecting wires for any signs of damage, looseness, or improper connection to the Inverter PCB.

5. 5

   Examine the fuses on the EMI PBA for any signs of being blown or defective.

6. 6

   Ensure that all screws on the Terminal Block and Power Terminal Box are firmly fastened and wires are securely assembled.