Frigidaire Refrigerators

The Air Filter indicator illuminates when it's time to replace the internal air filter. This typically occurs every 6 months and is important to maintain optimal air quality and odor control within the refrigerator.

An audible warning tone sounds when you interact with the display while the 'Lock' feature is enabled, or when an active alert such as 'Door Open', 'High Temp', or 'Power Outage' is present.

The Clear Alerts button is used to reset any active and illuminated alarms on your refrigerator. This includes alarms for Door Open, High Temp, and Power Outage.

The refrigerator emits an audible alarm when the Cold Drink Timer has completed its cycle. This indicates that your drink is chilled and ready to be removed from the freezer compartment. Leaving carbonated drinks in the freezer for too long can cause them to explode.

The Control Lock feature prevents the display from being used accidentally. When it is enabled, you cannot change any settings. You will see the indicator flash and hear a tone when you try to interact with the display.

Simultaneously pressing and holding the 'Crush' and 'Light' buttons for 5 seconds will switch the display mode between 'Sleep mode' (dims after inactivity) and 'Awake mode' (always on). A tone confirms the change.

This occurs on dispenser models if a jammed ice cube holds the flapper open when Cube or Crush is selected. An alarm sounds, and the current selection blinks.

When the 'Deli' indicator is lit, the Custom-Flex™ Temp Drawer is set to a temperature (37°F/3°C) appropriate for storing deli foods or snacks.

The electronic control system has detected a performance problem. Error messages or number codes may flash on the digital display.

When the display is locked, attempting to change settings or dispense ice/water will cause the lock indicator to flash and an audible warning tone to sound. This feature prevents unintended changes to your refrigerator's settings and actions.

This alarm sounds if the refrigerator door has been open for more than 3 minutes. It helps prevent food spoilage by alerting you to an unsealed door.

This alert sounds and the indicator lights up if a refrigerator or freezer door is left open for 5 minutes or more. The interior light also turns off after 5 minutes.

The 'Drinks' indicator lighting up means the Custom-Flex™ Temp Drawer is set to a specific temperature (32°F/0°C) suitable for cooling beverages.

This code indicates a problem with the sensor that measures the temperature inside the refrigerator. The appliance may still operate, but temperature regulation could be affected.

The refrigerator's display shows E2 and either indicator 1 or 5 is flashing, indicating a problem with the freezer temperature sensor. The refrigerator may still operate despite this error.

This error signifies an issue with the sensor responsible for monitoring the defrost cycle. This can impact the refrigerator's ability to prevent frost buildup.

This code indicates a problem with the communication between different components of the refrigerator. This could affect overall operation and control.

This error points to a problem with the sensor that measures the temperature of the room surrounding the refrigerator. This can affect cooling efficiency.

The refrigerator's display shows EH and either indicator 1 or 4 is flashing, indicating an issue with the humidity sensor. The refrigerator may still operate despite this error.

An audible alarm will sound if you attempt to select a feature or setting that is currently unavailable or invalid for the refrigerator's current operational mode. This typically happens when a selection is made that does not apply.

After installing a new water filter, the system performs an authentication process that can take up to 30 seconds. During this time, the filter status on the display updates.

If food items in the fresh food compartment are freezing, the temperature setting might be too low, or items could be placed too close to the internal air ports. Direct cold air from the air ports can cause items to freeze.

If food is freezing in the fresh food compartment, it means the temperature setting is likely too low for that section of the refrigerator.

When the 'Freezer' indicator lights up on the Custom-Flex™ Temp Drawer controls, it means the drawer is set to its coldest temperature setting, intended for freezing items.

The control panel displays 'HI' for the compartment with a high temperature, and an alarm sounds every 10 seconds. This indicates a high temperature condition.

High Temp illuminates next to Clear Alerts, and the alarm plays every 60 seconds. This signals a high temperature condition in the refrigerator or freezer.

The High Temperature Alarm activates when the interior temperature has been too high for an extended period. The indicator lights up and an audible alarm sounds.

The ice maker indicator light blinks when the ice maker has been manually turned off, but there is still existing ice in the bucket being dispensed. This is an informational blink, not an error, indicating the ice maker itself is not actively producing ice.

This indicator light illuminates when the ice maker function has been intentionally turned off. Ice production will not occur while this light is on.

The Ice Maker indicator blinks when the ice maker is turned off but ice is still being dispensed from the bucket.

Simultaneously pressing and holding the 'Ice' and 'Light' buttons for 5 seconds will switch the display mode between 'Sleep mode' (dims after inactivity) and 'Awake mode' (always on). A tone confirms the change.

This occurs when the display is locked and you try to interact with it. An indicator flashes, and a warning tone sounds to show settings cannot be changed.

You notice moisture, frost, or water accumulating on the interior walls, exterior surfaces, between doors, or in vegetable drawers. This can be normal in very humid conditions, but can also indicate an issue with sealing or air flow.

The display shows 'OF' for 3 seconds, accompanied by four falling beeps, when the Display Always-On mode is deactivated.

The display shows 'ON' for 3 seconds, accompanied by four rising beeps, when the Display Always-On mode is activated.

A single beep typically sounds to confirm that a setting has been changed or an action has been acknowledged by the control panel, such as selecting a drawer mode or adjusting temperature.

After a power failure, this alert illuminates and a tone sounds once power has been restored. This occurs if the refrigerator or freezer's internal temperatures reached unsafe levels during the outage, indicating potential food spoilage.

This indicator and tone alert you to a power outage. Press Clear Alerts to acknowledge. The unit continues normal operation, but other modes might be temporarily off.

This alert appears after power has been restored following an outage. Press any button to silence the tone.

The 'Replace Air Filter' indicator illuminates every 6 months or when the air filter needs to be replaced to maintain odor filtering.

This indicator illuminates every 6 months or when the air filter needs replacing. It prompts the user to change the air filter.

This message appears on the display, often after filter replacement, indicating the water filter needs changing or that the installed filter was not properly authenticated. Dispensing functions may still work.

The 'Replace Water Filter' indicator light illuminates when the water filter needs to be changed. This usually occurs every 6 months or after dispensing a certain amount of water.

This indicator lights up every 6 months or after dispensing 120 gallons of water, signaling that the water filter needs replacement.

The display shows 'SB' when Sabbath Mode is enabled. This mode disables features like lights and the control panel to comply with religious observances.

While in Sabbath Mode, the High Temp alarm remains active for health reasons. If the cabinet temperature goes outside the safe zone for 20 minutes, this alarm will activate. The alarm will silence itself after 10 minutes, but the High Temp icon will remain lit until Sabbath Mode is exited.

When 'Sb' is shown on the display, it indicates that the refrigerator is operating in Sabbath Mode. In this mode, certain functions like interior lights, the dispenser, and most control panel features are disabled. The refrigerator remains in this mode even after a power failure until manually deactivated.

The display shows 'Sb' when Sabbath Mode is activated. In this mode, lights, dispensers, and the control panel are disabled. The refrigerator continues normal operation.

In Sleep Mode, the display LEDs are not continuously illuminated to save energy. This is the default display setting. Pressing any key will temporarily illuminate the LEDs, which will then turn off again after a short period of inactivity.

A solid red LED on the control panel typically indicates a general fault or error condition within the refrigerator. The specific issue may require further diagnosis.

The Water Filter indicator illuminates to inform you that the water filter has reached its service life. It needs to be replaced approximately every 6 months or after 120 gallons of water have been dispensed to maintain water quality.