Hoover Pro Wash Dry Series 5 Washer Dryer
26 fault codes documented
CLR FLTR - Drainage error, pump filter needs cleaning
The Hoover Pro Wash Dry Series 5 Washer Dryer displays 'CLR FLTR' when it detects a drainage error, specifically that water has not fully drained within 6 minutes. This indicates a blockage or issue in the drainage system.
Drainage failure - Water not draining from the machine
The Hoover Pro Wash Dry Series 5 Washer Dryer is unable to drain water, leaving water inside the drum. This can be due to blockages in the drain system or incorrect hose placement.
Washing Machine is draining while being filled - Drain hose installation error
The Hoover Pro Wash Dry Series 5 Washer Dryer is draining water at the same time it is attempting to fill. This is typically caused by incorrect drain hose installation, creating a siphoning effect.
E2 - Door lock error
The Hoover Pro Wash Dry Series 5 Washer Dryer shows 'E2' when there is an issue with the door locking mechanism. The door must be securely closed and locked for the machine to operate safely.
E4 - Water level not reached or drain hose siphoning
The Hoover Pro Wash Dry Series 5 Washer Dryer displays 'E4' if the desired water level is not reached, or if the drain hose is causing self-siphoning, leading to water constantly draining out of the machine.
E8 - Water protective level error
The Hoover Pro Wash Dry Series 5 Washer Dryer displays 'E8' when it detects a water protective level error. This indicates a significant problem with the machine's ability to sense or regulate water levels, potentially leading to overfilling.
Eb 5 E - Clothes jamming alarm
The Hoover Pro Wash Dry Series 5 Washer Dryer displays 'Eb 5 E' to indicate that clothes are jammed inside the drum. This can disrupt the wash cycle and prevent proper operation.
End - Wash cycle finished
The Hoover Pro Wash Dry Series 5 Washer Dryer displays 'End' to indicate that the washing cycle is complete. The appliance will then shut off automatically, signifying it's safe to open the door.
Excessive foam - Too much foam in drum or detergent drawer
The Hoover Pro Wash Dry Series 5 Washer Dryer is producing an excessive amount of foam during the wash cycle, which may float in the drum or overflow from the detergent drawer. This can affect washing performance and rinse quality.
F3 - Temperature sensor error
The Hoover Pro Wash Dry Series 5 Washer Dryer has detected an issue with its internal temperature sensor. This technical fault means the appliance cannot accurately measure or regulate internal temperatures.
F4 - Heating error
The Hoover Pro Wash Dry Series 5 Washer Dryer is experiencing a problem with its heating system. This issue may prevent the water from reaching the correct temperature required for the selected wash cycle.
F7 - Motor error
The Hoover Pro Wash Dry Series 5 Washer Dryer has detected an error related to its motor. This can prevent the drum from spinning or rotating correctly during the wash or spin cycles.
FA - Water level sensor error
The Hoover Pro Wash Dry Series 5 Washer Dryer has detected a problem with its water level sensor. This sensor is crucial for the appliance to accurately measure and maintain water levels during cycles.
FC0, FC1 or FC2 - IoT module configuration error
The Hoover Pro Wash Dry Series 5 Washer Dryer displays one of these codes when its IoT (Internet of Things) module experiences an abnormal communication error or fails to configure properly. This is a technical issue.
Washing Machine fails to operate - Programme not starting or machine is unresponsive
The Hoover Pro Wash Dry Series 5 Washer Dryer is not starting a selected programme or is unresponsive. This can be due to power issues, incorrect settings, or safety features.
Laundry has grey patches - Stains from fats or oils
Laundry comes out of the Hoover Pro Wash Dry Series 5 Washer Dryer with grey patches. This type of discoloration is typically caused by fatty substances such as oils, creams, or ointments present on the garments.
Lock displayed - Door cannot be opened
The Hoover Pro Wash Dry Series 5 Washer Dryer displays 'Lock' when the door cannot be opened. This is a safety feature engaged during the washing cycle, especially when there's high water level, high temperature, or during the spinning cycle.
Washing Machine will not fill with water - Water supply issue
The Hoover Pro Wash Dry Series 5 Washer Dryer is not filling with water when a programme starts. This usually indicates a problem with the water supply or the inlet hose.
Operation stops for a period of time - Machine pauses during cycle
The Hoover Pro Wash Dry Series 5 Washer Dryer temporarily pauses during a wash cycle. This can be a normal part of the program, an indication of a load issue, or an error state.
Operation stops before completing wash cycle - Cycle interrupted
The Hoover Pro Wash Dry Series 5 Washer Dryer has stopped operating before the wash cycle has finished. This often indicates an interruption in either the water or electrical supply to the appliance.
Washing powder residues on laundry - White spots remaining
After washing, white spots or residues from washing powder are visible on the laundry. This is caused by insoluble detergent particles that did not dissolve completely during the wash cycle.
Power failure cuts programme - Door mechanically blocked
If a power failure occurs while the Hoover Pro Wash Dry Series 5 Washer Dryer is operating, the current programme and settings are saved. However, the door will be mechanically blocked for safety reasons until certain conditions are met.
Spinning fails - Machine not spinning or laundry remains wet
The Hoover Pro Wash Dry Series 5 Washer Dryer is failing to spin the laundry, resulting in excessively wet clothes at the end of the cycle. This is typically due to an unbalanced load within the drum.
Start/Pause button LED flashing - Programme interrupted
When the LED above the Start/Pause button on the Hoover Pro Wash Dry Series 5 Washer Dryer is flashing, it indicates that a running programme has been temporarily interrupted or paused by the user.
Strong vibration while spinning - Machine is shaking excessively
The Hoover Pro Wash Dry Series 5 Washer Dryer is vibrating or shaking excessively during the spin cycle. This issue is often related to installation, leveling, or how the laundry is loaded.
Unsatisfactory washing result - Clothes not clean
The Hoover Pro Wash Dry Series 5 Washer Dryer is not cleaning laundry effectively, leading to unsatisfactory washing results. This can be caused by incorrect programme selection, improper detergent use, or incorrect loading.