Miele Washing Machines
18 fault codes documented
Display dark, Start/Stop light off — No power to the machine
The washing machine's display is unlit and the Start/Stop button indicator light is off, indicating that the appliance is not receiving electrical power.
Drum lighting does not come on — Automatic switch-off or faulty
The interior drum lighting is not illuminated. This could be due to automatic switch-off after a period of inactivity or a fault with the lighting itself.
Display asks to enter a code — Access code activated
The washing machine's display is prompting you to enter a code, which means the access code feature has been activated to prevent unauthorized use.
Extra rinse performed — Too much foam detected
The washing machine automatically performs an additional rinse cycle if it detects an excessive amount of foam inside the drum. This is a safety and performance feature to ensure your laundry is thoroughly rinsed and no detergent residue remains.
Laundry still wet — Imbalance detected, reduced spin speed
The laundry remains wet after the wash cycle because the machine detected an imbalance during the final spin and automatically reduced the spin speed to compensate.
Machine shakes during spin cycle — Not level
The washing machine is shaking excessively during the spin cycle, indicating that it may not be correctly leveled on its installation surface.
Washing machine smells — Bacteria or unpleasant odors
The washing machine has developed an unpleasant odor, often due to bacteria buildup from frequent low-temperature washes or leaving the door and detergent drawer closed.
Start/Stop sensor flashes slowly — Energy saving mode activated
The Start/Stop sensor light is slowly flashing, and the display and sensor control lighting are switched off to save energy. This is a normal energy-saving behavior, not a fault.
Strange pump noises — Normal operation slurping sound
Unfamiliar slurping noises are heard from the pump. This is not a fault but a normal part of the washing machine's operation at the end of the pump sequence.
WiFi connection failure — App cannot connect or loses connection
Your washing machine's integrated WiFi module might experience sporadic or complete connection failures. This means the Miele@mobile App may not be able to operate the machine remotely or show its current operating status. Other wireless devices in your home, like microwave ovens, can interfere with the signal.
Water intake fault — No or restricted water supply
The washing machine is experiencing a problem with its water supply, indicating that water cannot enter the machine correctly or sufficiently. This message appears after a program has been interrupted.
Align the machine — Laundry not properly spun due to imbalance
The washing machine indicates that laundry was not properly spun, possibly due to an imbalance or the 'Pre-ironing' Extra option not completing correctly. This message appears at the end of a program.
Intensive flow — Pumps are dirty or jet blocked
The washing machine is indicating an issue with water flow, possibly due to dirty pumps or a blocked jet in the door ring. This message appears at the end of a program.
The door will not lock — Door is not properly closed
The washing machine's door is not properly closed or the door lock mechanism could not engage, preventing the program from starting.
Fault F — General internal fault
The washing machine has detected a general internal fault. If restarting the machine does not resolve the issue, professional service may be required. This message appears after a program has been interrupted.
Waterproof system activated — Water protection system detected a leak
The washing machine's internal water protection system has detected a potential leak or overflow, activating a safety shutdown. This message appears after a program has been interrupted.
Drainage fault — Water outlet blocked or hose too high
The washing machine is detecting an issue with draining water, possibly due to an obstruction or incorrect hose installation. This message appears after a program has been interrupted.
Please wait / Add laundry message — Program paused to add items
The display shows "Please wait" then "Add laundry" when you touch the "Add laundry" sensor control. This is a normal status message indicating the machine is pausing the program and unlocking the door for you to add or remove laundry.